Nouveaux produits
Nouveaux produits
Filtres actifs
-
-
-
-
-
-
-
-
-
-
-
Guidon COMAS Aluminium H105mm
60,00 €Description
- Trial handlebar made of 7075-T6 aluminum with exclusive geometry according to the new riding trends.
- Higher overall height and extremes with less angulation allowing greater mobility in driving.
- It allows to lower the gravity center of the stem maintaining the position of the handlebar (without negative angle).
- Manufactured using 3 thicknesses to achieve an excellent combination of stiffness and weight.
- Ø31.8 mm diameter compatible with most of the stems used in Trial.
- Incorporates central markings to fix the handlebar on the stem in proper position.
- Cutting lines at the ends to facilitate cutting and to achieve the desired width.
- Its design provides excellent grip, feel and durability.
- Suitable for use in competition and or training.
Material
- Aluminium 7075-T6
Sizes
- Length: 720mm
- Upward: 8º
- Backward: 6º
- Rise: 105mm
Finish
- Black anodized with COMAS graphics in white
Weight
- 305g -
-
Jante COMAS 20" 32T
38,00 €Description
- Extrude 20" mono-layer rim with W profile.
- Can be used in both hubs for rim brake or disc brake.
- Made of high quality 6061-T6 aluminum alloy.
- Central surface out of phase with respect to the sides increasing the structural rigidity.
- Large braking surface with 12mm height and 48mm of total rim width.
- Lightweight construction with individual CNC milling
- Spoke holes oriented on both sides to get a much more rigid wheel assembly.
Material
- Aluminum 6061-T6
Sizes
- Inches: 20 "
- Total width: 48mm
- Braking surface: 12mm
- ISO: Ø406mm
- Spoke holes: 32H
Finish
- Black anodized
Weight
- 398g -
-
-
-
-
-
-
-
-
-
Manivelles COMAS ISIS 160mm
60,00 €Description
- Forged aluminum crankset with ISIS bottom bracket system
- Simple design that guarantees maximum rigidity and resistance.
- Later machining to reduce weight
- Standard 1.37 "x 24tpi thread compatible with the most of freewheels.
- 14mm threaded section to be able to use a UCI ring protector
- Offset of 33mm to avoid possible friction with the chassis or the brake cylinders.
- Available in 160mm and 170mm
Material
- Aluminum 7075-T6
Sizes
- Length: 160mm
- Offset: 33mm
- Freewheel thread: 1.37”x24t
- 9/16” pedal thread
Finish
- Black anodized with COMAS graphics laser engraved.
Weight
- 515g
Important note
The minimum contact thread between crank and freewheel must be L7mm to avoid thread damage. -
-
-
-
-
Garde-boue léger avant en polypropylène "FatFender"
15,00 €- Garde-boue léger et durable en polypropylène spécialement conçu pour les fatbikes
- Garde-boue pour tube oblique
- Fixation à double sangle élastomère
-
-
-
-
Garde-boue léger AV ou AR en polypropylène "FlexFender"
12,00 €- Garde-boue léger et durable en polypropylène
- Conçu pour un montage avant ou arrière
- Protection renforcée des plongeurs avant
- 4 attaches de câbles incluses
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
20" COMAS roue avant
128,50 €Description
- 20” COMAS Front wheel for disc brake system.
- Incorporates a 20in single-layer lightweight and 28H extruded rim with a W profile.
- Ultra-light 100mm hub with exclusive and minimalist design of high quality CNC machined.
- 15G (1.8mm) spokes and aluminum nipples.
Sizes
- Inches:20"
- Total width: 32mm
- Braking surface: 12mm
- ISO: Ø406mm
- Spoke holes: 28H
- Width: 100mm
Finish
- Black anodized with COMAS logos engraved with laser.
Weight
- 710g -
-
-
Pignon 12T COMAS
25,00 €Description
- CNC sprocket machined in Aluminum 7075 T6.
- Standard thread 1.37"x24t compatible with most rear hubs.
- Wide base of 12mm.
- 2mm teeth in central arrangement for a better drive transmission.
- Compatible with 1/8" and 3/32" chains.
Material
- Aluminum 7075-T6
Sizes
- 12 teeth
- Total width: 12mm
- Tooth width: 2mm
- Thread 1.37"x24t
Finish
- Red anodized
Weight
- 12g -
-
-
-
-
-
-
-
-
Pédales STAMP 7 small Edition Limitée Danny Macaskill's
235,00 €Les crankbrothers stamp 7, sont des pédales fines et légères proposant une finition et un fonctionnement haut de gamme. Cette pédale est équipée d'une plateforme en aluminium forgé, robuste et légère. De plus les pédales Stamp 7 sont une édition limitée aux couleurs du célèbre Danny MACASKILL !
-
Pignon 15T COMAS
25,00 €Description
- CNC sprocket machined in Aluminum 7075 T6
- Standard thread 1.37 "x 24t compatible with most rear hubs
- Wide base of 12mm
- 2mm teeth in central arrangement for a better drive transmission.
- Compatible with 1/8 "and 3/32" chains.
Material
- Aluminum 7075-T6
Sizes
- 15 teeth
- Total width: 12mm
- Tooth width: 2mm
- Thread 1.37 "x24T
Finish
- Red anodized
Weight
- 25g -
-
-
-
-
-
-
-
Gant route été Racer - Rouge - Taille M
20,00 €- Partie supérieure en Lycra stretch respirant.
- Paume Amara avec rembourrage supplémentaire en mousse.
- Pouce en microfibre pour essuyer la transpiration.
-
-
Gant route été Racer - Noir - Taille M
20,00 €- Partie supérieure en Lycra stretch respirant.
- Paume Amara avec rembourrage supplémentaire en mousse.
- Pouce en microfibre pour essuyer la transpiration.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Sangles pour Porte bagage BBB
6,00 €Sangles élastiques universelles pour attacher des bagages sur un porte-bagages
-
-
-
-
-
