Roue libre COMAS 30.6 16T

Description
- 30 hitch points and 6 pawls made of high strength treated steel
- 3 groups of 2x5 hitch each obtaining 30 hitch points per revolution.
- Extraction using ISIS bottom bracket extractor.
- Standard thread of 1,37 '' x 24T
- New COMAS internal springs reinforced to increase reliability and accuracy.
- Sealed bearings on both sides to prevent dust and dirt entering the mechanism.
- Compatible with 1/8 "and 3/32" chains
Material
- Crown: Cr-Mo machined steel
- Body: Cr-Mo machined steel
Compatibility
- Not compatible with BB30 crankset
- Not compatible with cassette type cranks
Sizes
- 16 teeth
- 6 pawls
- 30 hitch points
- Tooth width: 2.2mm
- Total width: 17mm
Weight
- 186g
Finish
- Finished in red / black anodized with COMAS graphics laser engraved.
Additional Information
It is advisable to make a preliminary run of the freewheel to eliminate excess grease from the mechanism and ensure the correct settling of the pawls. This process can be accelerated by introducing a little oil in the groove between the center of the freewheel and the teeth.
If the freewheel is used for trial without having set the palws first, it will not work properly and will cause it to jump, damaging the slot and the pawl.