Nouveaux produits
Nouveaux produits
Filtres actifs
-
-
-
-
-
-
Guidon COMAS Aluminium H105mm
60,00 €Description
- Trial handlebar made of 7075-T6 aluminum with exclusive geometry according to the new riding trends.
- Higher overall height and extremes with less angulation allowing greater mobility in driving.
- It allows to lower the gravity center of the stem maintaining the position of the handlebar (without negative angle).
- Manufactured using 3 thicknesses to achieve an excellent combination of stiffness and weight.
- Ø31.8 mm diameter compatible with most of the stems used in Trial.
- Incorporates central markings to fix the handlebar on the stem in proper position.
- Cutting lines at the ends to facilitate cutting and to achieve the desired width.
- Its design provides excellent grip, feel and durability.
- Suitable for use in competition and or training.
Material
- Aluminium 7075-T6
Sizes
- Length: 720mm
- Upward: 8º
- Backward: 6º
- Rise: 105mm
Finish
- Black anodized with COMAS graphics in white
Weight
- 305g -
Jante COMAS 20" 32T
38,00 €Description
- Extrude 20" mono-layer rim with W profile.
- Can be used in both hubs for rim brake or disc brake.
- Made of high quality 6061-T6 aluminum alloy.
- Central surface out of phase with respect to the sides increasing the structural rigidity.
- Large braking surface with 12mm height and 48mm of total rim width.
- Lightweight construction with individual CNC milling
- Spoke holes oriented on both sides to get a much more rigid wheel assembly.
Material
- Aluminum 6061-T6
Sizes
- Inches: 20 "
- Total width: 48mm
- Braking surface: 12mm
- ISO: Ø406mm
- Spoke holes: 32H
Finish
- Black anodized
Weight
- 398g -
-
-
-
-
-
-
-
Manivelles COMAS ISIS 160mm
60,00 €Description
- Forged aluminum crankset with ISIS bottom bracket system
- Simple design that guarantees maximum rigidity and resistance.
- Later machining to reduce weight
- Standard 1.37 "x 24tpi thread compatible with the most of freewheels.
- 14mm threaded section to be able to use a UCI ring protector
- Offset of 33mm to avoid possible friction with the chassis or the brake cylinders.
- Available in 160mm and 170mm
Material
- Aluminum 7075-T6
Sizes
- Length: 160mm
- Offset: 33mm
- Freewheel thread: 1.37”x24t
- 9/16” pedal thread
Finish
- Black anodized with COMAS graphics laser engraved.
Weight
- 515g
Important note
The minimum contact thread between crank and freewheel must be L7mm to avoid thread damage. -
-
-
-
-
-
-
-
-
Jeu de manivelles Delta Double Diamond 160 mm
92,00 €160 MM, Q: 16 POUR STANDARD ISIS
CLASSIC+ LINE, GEN2 + GEN4 -
-
-
-
Jeu de manivelles Delta Double Diamond 165 mm
92,00 €170 MM, Q: 16 POUR STANDARD ISIS
CLASSIC+ LINE, GEN2 + GEN4 -
-
20" COMAS roue avant
128,50 €Description
- 20” COMAS Front wheel for disc brake system.
- Incorporates a 20in single-layer lightweight and 28H extruded rim with a W profile.
- Ultra-light 100mm hub with exclusive and minimalist design of high quality CNC machined.
- 15G (1.8mm) spokes and aluminum nipples.
Sizes
- Inches:20"
- Total width: 32mm
- Braking surface: 12mm
- ISO: Ø406mm
- Spoke holes: 28H
- Width: 100mm
Finish
- Black anodized with COMAS logos engraved with laser.
Weight
- 710g -
Pignon 12T COMAS
25,00 €Description
- CNC sprocket machined in Aluminum 7075 T6.
- Standard thread 1.37"x24t compatible with most rear hubs.
- Wide base of 12mm.
- 2mm teeth in central arrangement for a better drive transmission.
- Compatible with 1/8" and 3/32" chains.
Material
- Aluminum 7075-T6
Sizes
- 12 teeth
- Total width: 12mm
- Tooth width: 2mm
- Thread 1.37"x24t
Finish
- Red anodized
Weight
- 12g -
-
Pignon 15T COMAS
25,00 €Description
- CNC sprocket machined in Aluminum 7075 T6
- Standard thread 1.37 "x 24t compatible with most rear hubs
- Wide base of 12mm
- 2mm teeth in central arrangement for a better drive transmission.
- Compatible with 1/8 "and 3/32" chains.
Material
- Aluminum 7075-T6
Sizes
- 15 teeth
- Total width: 12mm
- Tooth width: 2mm
- Thread 1.37 "x24T
Finish
- Red anodized
Weight
- 25g -
-
-
-
-
-
-
-
-
-
-
-
-
