-
-
-
-
-
-
-
Capuchon / Téton pour vis de purge Hope
1,50 €Livraison estimée entre 10 et 15 jours pour les composants Hope
HBSP240
-
-
-
-
-
-
-
-
Porte Clé - Hope - 6 Couleurs
18,00 €Délais de livraison Hope de 10 à 15 jours
Disponible en 6 couleurs
PROM063
-
-
Frein Hope Tech4 / Trial zone Black/Red
235,00 €Disponible en 5 couleurs / droite ou gauche
Délais de livraison Hope de 10 à 15 jours
-
-
-
-
-
-
-
-
-
-
-
-
-
Etrier complet - Hope V4 - 7 couleurs
157,00 €Délais de livraison Hope de 10 à 15 jours
Disponible en 7 couleurs
HBSPC83B
-
-
-
-
-
Guidon COMAS Aluminium H105mm
60,00 €Description
- Trial handlebar made of 7075-T6 aluminum with exclusive geometry according to the new riding trends.
- Higher overall height and extremes with less angulation allowing greater mobility in driving.
- It allows to lower the gravity center of the stem maintaining the position of the handlebar (without negative angle).
- Manufactured using 3 thicknesses to achieve an excellent combination of stiffness and weight.
- Ø31.8 mm diameter compatible with most of the stems used in Trial.
- Incorporates central markings to fix the handlebar on the stem in proper position.
- Cutting lines at the ends to facilitate cutting and to achieve the desired width.
- Its design provides excellent grip, feel and durability.
- Suitable for use in competition and or training.
Material
- Aluminium 7075-T6
Sizes
- Length: 720mm
- Upward: 8º
- Backward: 6º
- Rise: 105mm
Finish
- Black anodized with COMAS graphics in white
Weight
- 305g -
-
-
-
-
Jante COMAS 20" 32T
38,00 €Description
- Extrude 20" mono-layer rim with W profile.
- Can be used in both hubs for rim brake or disc brake.
- Made of high quality 6061-T6 aluminum alloy.
- Central surface out of phase with respect to the sides increasing the structural rigidity.
- Large braking surface with 12mm height and 48mm of total rim width.
- Lightweight construction with individual CNC milling
- Spoke holes oriented on both sides to get a much more rigid wheel assembly.
Material
- Aluminum 6061-T6
Sizes
- Inches: 20 "
- Total width: 48mm
- Braking surface: 12mm
- ISO: Ø406mm
- Spoke holes: 32H
Finish
- Black anodized
Weight
- 398g -
-
-
pédales WAW Simple Cage
49,00 €Les pédales simple cage WAW vous assurent un meilleur grip que des plateformes, ainsi qu’un gain de poids.
La cage est constituée d’un alliage d’aluminium 7075 de 3 mm d’épaisseur. Elle comporte six trous, deux par côté, pour diminuer le poids total sans compromettre la solidité.
L’axe est en acier pour une durabilité maximale et le corps en aluminium 7075 T6. -
-
-
Frein Hope Tech3 / Trial zone noir
199,00 € 215,00 €Disponible en 5 couleurs / droite ou gauche /durite standard ou aviation.
-
Pneu AV WAW 26'' 2.0
54,90 €Pneu Avant Trial 26" * 2.0 WAW Edition, Gomme tendre 42a, Simple Pli, 72Tpi, Tringle souple.
-
-
JANTE WAW AVANT LIGHT 26'' 32H
54,90 €Taille : 26"
Largeur : 32 mm
Nombre de rayons : 32
Poids : 470 g
Couleur : noir -
-
-
Frein Hope Tech4 / Trial zone Black/Black
235,00 €Disponible en 5 couleurs / droite ou gauche
Délais de livraison Hope de 10 à 15 jours
-
-
JANTE WAW ARRIÈRE LIGHT 26'' 32H
69,90 €Taille : 26"
Largeur : 47 mm
Nombre de rayons : 32
Poids : 560 g
Couleur : noir -
Manivelles COMAS ISIS 160mm
60,00 €Description
- Forged aluminum crankset with ISIS bottom bracket system
- Simple design that guarantees maximum rigidity and resistance.
- Later machining to reduce weight
- Standard 1.37 "x 24tpi thread compatible with the most of freewheels.
- 14mm threaded section to be able to use a UCI ring protector
- Offset of 33mm to avoid possible friction with the chassis or the brake cylinders.
- Available in 160mm and 170mm
Material
- Aluminum 7075-T6
Sizes
- Length: 160mm
- Offset: 33mm
- Freewheel thread: 1.37”x24t
- 9/16” pedal thread
Finish
- Black anodized with COMAS graphics laser engraved.
Weight
- 515g
Important note
The minimum contact thread between crank and freewheel must be L7mm to avoid thread damage. -
-
-
Kit d'entretien Hope Tech 4 - sans Huile
32,00 €Livraison estimée entre 10 et 15 jours pour les composants Hope
-
Adaptateur HOPE Étrier Mount M-Post 160 à Post 200 -...
26,00 €Livraison estimée entre 10 et 15 jours pour les composants Hope
HBMMN
-
Frein Hope Tech4 / Trial zone Black/Blue
235,00 €Disponible en 5 couleurs / droite ou gauche
Délais de livraison Hope de 10 à 15 jours
-
-
-
-
Huile Hope DOT 5.1 250ml
6,00 €Livraison estimée entre 10 et 15 jours pour les composants Hope
HBSP0
-
-
-
Frein Hope Tech4 / Trial zone Black/Orange
235,00 €Disponible en 5 couleurs / droite ou gauche
Délais de livraison Hope de 10 à 15 jours
-
-
Adaptateur Étrier PM / PM HOPE (+20 mm)
26,00 €Livraison estimée entre 10 et 15 jours pour les composants Hope
HBMLN
-
-
Kit d'entretien Hope Tech 3 - sans Huile
32,00 €Livraison estimée entre 10 et 15 jours pour les composants Hope
HTTEBK1-O
-
-
-
-
Frein Hope Tech4 / Trial zone Black/Purple
235,00 €Disponible en 5 couleurs / droite ou gauche
Délais de livraison Hope de 10 à 15 jours
-
Spacer Hope pour cassette Single Speed
14,00 €Ce kit est necessaire sur un moyeux type cassette single Speed
-
-
-
-
-
-
-
Frein Hope Tech4 / Trial zone Black/Silver
235,00 €Disponible en 5 couleurs / droite ou gauche
Délais de livraison Hope de 10 à 15 jours
-
-
-
-
-
-
-
20" COMAS roue avant
128,50 €Description
- 20” COMAS Front wheel for disc brake system.
- Incorporates a 20in single-layer lightweight and 28H extruded rim with a W profile.
- Ultra-light 100mm hub with exclusive and minimalist design of high quality CNC machined.
- 15G (1.8mm) spokes and aluminum nipples.
Sizes
- Inches:20"
- Total width: 32mm
- Braking surface: 12mm
- ISO: Ø406mm
- Spoke holes: 28H
- Width: 100mm
Finish
- Black anodized with COMAS logos engraved with laser.
Weight
- 710g -
Frein Hope Tech3 / V4 rouge
240,00 €Disponible en 5 couleurs / droite ou gauche /durite standard ou aviation.
-
-
Disque Hope trial Zone
56,00 €Livraison estimée entre 10 et 15 jours pour les composants Hope
Disponible en 160 & 180mm
HBSP2961606
HBSP2961806
-
-
-
Pignon 12T COMAS
25,00 €Description
- CNC sprocket machined in Aluminum 7075 T6.
- Standard thread 1.37"x24t compatible with most rear hubs.
- Wide base of 12mm.
- 2mm teeth in central arrangement for a better drive transmission.
- Compatible with 1/8" and 3/32" chains.
Material
- Aluminum 7075-T6
Sizes
- 12 teeth
- Total width: 12mm
- Tooth width: 2mm
- Thread 1.37"x24t
Finish
- Red anodized
Weight
- 12g -
DISQUE FLOTTANT Hope - 6vis - NOIR
60,00 €Disponible en 6 couleurs et 7 tailles différentes 140 160 180 183 185 200 203 205 220
Délais de livraison Hope de 10 à 15 jours
HBSP3301806FN
-
-
-
DISQUE FLOTTANT Hope - 6vis - ROUGE
69,00 €Disponible en 6 couleurs et 7 tailles différentes 140 160 180 183 185 200 203 205 220
Délais de livraison Hope de 10 à 15 jours
HBSP3301806FR