Liste des produits de la marque CLEAN

Attention quantité limitée

100€ de remise immédiate avec le code R100

Nouvelle version du populaire vélo carbone 20 "Clean K1. Nouveaux graphismes, conservant un carbone UD dans toute sa structure, sauf dans la première couche que nous utilisons 12K pour lui donner un look spectaculaire.

Parmi les points forts, citons les nouvelles douilles traversantes X3, avec des arbres de 12 mm de diamètre. Inserts interchangeables à visser en aluminium 7075. Le pignon fixe est cannelé Shimano HG.

La plaque de protection a été repensée avec de nouveaux inserts à l'intérieur du cadre pour éviter les problèmes similaires à ceux de la première version.

La fourche est préparée pour les moyeux de 12 mm à axe traversant (standard) et standard en échangeant les orteils avant.

Nouvelle version du populaire vélo carbone 20 "Clean K1. Nouveaux graphismes, conservant un carbone UD dans toute sa structure, sauf dans la première couche que nous utilisons 12K pour lui donner un look spectaculaire.

Parmi les points forts, citons les nouvelles douilles traversantes X3, avec des arbres de 12 mm de diamètre. Inserts interchangeables à visser en aluminium 7075. Le pignon fixe est cannelé Shimano HG.

La plaque de protection a été repensée avec de nouveaux inserts à l'intérieur du cadre pour éviter les problèmes similaires à ceux de la première version.

La fourche est préparée pour les moyeux de 12 mm à axe traversant (standard) et standard en échangeant les orteils avant.

Clean K1 26" Frame The K1 is of course the evolution of its smaller sister, the X2, bringing the performance to another level. As it´s wellknown in Trials, the weight is a key point for us, to jump further, to break new records, new goals. But without the

Clean X2 26" Frame is our high end model, Clean X2. Developed and tested during a lot of months by our pro team. Integrated chain tensioner, rear whell is always on the same position, improving the brake performance a lot

20” carbón fiber fork Geometry: Axle to Crown lenght: 370mm Axle offset: 40mm Steerer tube length: 180mm

Livrer avec adaptateur patte vertical ou adaptateur axe traversant nous préciser dans la commande.

Carbon Fork 26" Geometry: Axle to Crown lenght: 400mm Axle offset: 35mm Steerer tube length: 180mm

Délais variables / Nous contacter au 0476182969 ou par mail: info@tmsport.org

26" Front Wheel it's a complete Wheel built and centered by hand in our warehouse to offer a really good performance.

26" Rear Wheel it's a complete Wheel built and centered by hand in our warehouse to offer a really good performance.

20" 32H Rear Wheel, it's a complete Wheel built and centered by hand in our warehouse to offer a really good performance.

20" Front Wheel it's a omplete Wheel built and centered by hand in our warehouse to offer a really good performance

26" Rear Wheel it's a complete Wheel built and centered by hand in our warehouse to offer a really good performance.

Carbon Fiber Handlebar 103.12.9 Constructed with high modulus carbón fiber, offering a máximum stiffness and strenght while keep an amazing weight. Of course, the carbón fibers are unidirectional (UD) positioned.

26" Front Wheel it's a complete Wheel built and centered by hand in our warehouse to offer a really good performance

20" X1 Front Wheel, it's a complete Wheel built and centered by hand in our warehouse to offer a really good performance.

Disc Rear Hub 116mm V2 High quality CNC hubs from our brand Clean Trials. Washers and spacers has a minimalist design to keep a low weight and giving a cool touch to your bike.

HS Rear Hub 116mm V2 it's high quality CNC hubs from our brand Clean Trials. Cone shape allows an improved strength and weight, due of the inner thickness can be thinner but still so strong.

HS Front Hub 100mm it's high quality CNC hubs from our brand Clean Trials. Cone shape allows an improved strength and weight, due of the inner thickness can be thinner but still so strong.

Disc Front Hub V2 100mm High quality CNC hubs from our brand Clean Trials. Cone shape allows an improved strength and weight, due of the inner thickness can be thinner but still so strong.

Disc Front Hub X1 100mm, X1 hubs from our brand Clean Trials made in high quality aluminium alloy and available in black anodised finish, with Clean laser logos.

HS Front Hub 100mm X1 it's a front hub made in high quality aluminium alloy with high quality sealed bearings, offering maximum protection against dirt and water and having an smooth running.

Aluminium Alloy Handlebar 103.12.9, made in high quality aluminium alloy and double butted handlebar, using bigger thickness in the key areas to improve stiffness and strength.

Description and materials
- New version of the high quality Clean 26” front rim.
- Developed in Spain and currently used by Clean team rider Sergi Llongueras.
- This new version has a unique, lighter design that still manages to keep a high durability and ensure a great performance.
- Made from high quality, super light 6061-T6 aluminium.
- 31mm wide profile, which offers a great balance between stability and low rolling resistance.
- Super light single-walled design, with customized holes, saving a good few grams without compromising its strength.
- Large sidewalls (17mm) ensure more than enough room for the pad, offering a better braking performance and therefore being ideal for rim brakes.
- 28 holes orientated on the rim sides, ensuring a stronger, stiffer build.
 
Dimensions
- 31mm wide
- Ø 540mm in internal diameter(ERD)
- 28 holes

Finishes
- Anodized black, with white laser etched Clean logos

Weight
- 519.6g

Additional information
Please, bear in mind this rim will only suit hubs with 28 holes.

Rear Rim 26" it's superlight front rim made in high quality extruded aluminium alloy, with large holes to save some weight without compromising its strenght.

Description and materials
- New version of the high quality Clean 19” front rim.
- Developed in Spain and currently used by UCI World Champion Abel Mustieles.
- This new version has a unique, lighter design that still manages to keep a high durability and ensure a great performance.
- Made from high quality 6061-T6 aluminium.
- 48mm wide design, which guarantees unmatchable stability on the back wheel, even at the lowest pressures.
- Super light single-walled design, with customized holes, saving a good few grams without compromising its strength.
- Large sidewalls (17mm) ensure more than enough room for the pad, offering a better braking performance and therefore being ideal for rim brakes.
- 32 holes orientated on the rim sides, great to use shorter spokes and ease the rim build, for an stronger and stiffer wheel.
- Available in anodized black or silver finish, with laser etched Clean logo
 
Dimensions
- 48mm wide
- Ø 374mm in internal diameter(ERD)
- 32 holes

Finishes
- Available in anodized black, with laser etched Clean logo

Weight
- 390g

Additional information
Please, bear in mind this rim will only suit hubs with 32 holes.

Description and materials
- New version of the high quality Clean V2 20” front rim.
- Developed in Spain and currently used by UCI World Champion Abel Mustieles.
- This new version has a unique, lighter design that still manages to keep a high durability and ensure a great performance.
- Made from high quality, super light 6061-T6 aluminium.
- 34mm wide profile, which offers a great balance between stability and low rolling resistance.
- Super light single-walled design, with customized holes, saving a good few grams without compromising its strength.
- Large sidewalls (13mm) ensure more than enough room for the pad, offering a better braking performance and therefore being ideal for rim brakes.
- Two versions available:
           · With 28 spoke holes (28H).
           · With 32 spoke holes (32H).
- The spoke holes are orientated on the rim sides, ensuring a stronger, stiffer build.
 
Dimensions
- 34mm wide
- Ø 394mm effective diameter (ERD)
- 28 or 32 holes

Finishes
- Anodized black, with white laser etched Clean logos

Weight
- 354.30g (32H)  and 366.48g (28H)

New rim brake clamps! Suitable with Magura, Hope, Echo and Racing Line brakes. Available in red anodised finished with Clean logo etched by laser.

Rim brake clamps, made by a forged mold in alloy. 9mm vertical adjustment and 360º lateral adjustment due of its new alloy washers.

Integrated Chain Tensioner, made to work with our new frames. Also Works perfectly with the Crewkerz bikes, due of our collaboration to push this new chain tensioner standard to the Trials industry.

Stem 145x25 Clean Trials stem with 145mm lenght Made in high quality 6061 T6 aluminium alloy Handlebar clamp features 4bolts and 31.8mm diameter (oversized), suitable with all the handlebars in the Trials market. Splitted clamp by CNC

Stem 130x25, handlebar clamp features 4bolts and 31.8mm diameter (oversized), suitable with all the handlebars in the Trials market.

Stem 130x25, handlebar clamp features 4bolts and 31.8mm diameter (oversized), suitable with all the handlebars in the Trials market.

Stem 150x35, handlebar clamp features 4bolts and 31.8mm diameter (oversized), suitable with all the handlebars in the Trials market. Splitted clamp by CNC

New aluminium jockey wheels for our chain tensioner made in high quality aluminium for a great durability and strenght.

Sprocket made in high quality Cr-Mo, CNC machined for a maximum durability. Available in 12, 13 and 15 teeth

Délais variables / Nous contacter au 0476182969 ou par mail: info@tmsport.org

Sprocket made in high quality Cr-Mo, CNC machined for a maximum durability. Available in 12, 13 and 15 teeth.

Steel Sprocket 13T Sprocket made in high quality Cr-Mo, CNC machined for a maximum durability

Sprocket made in high quality Cr-Mo, CNC machined for a maximum durability. Available in 12, 13 and 15 teeth.

Délais variables / Nous contacter au 0476182969 ou par mail: info@tmsport.org

Délais variables / Nous contacter au 0476182969 ou par mail: info@tmsport.org